Reply To: why i can not define the recorder when the material is steel01

HOME › FORUM › User Discussions › why i can not define the recorder when the material is steel01 › Reply To: why i can not define the recorder when the material is steel01

March 13, 2016 at 10:08 pm #23975
yuyang
Participant

and here are what the OpenSees feedback to me

===============================================================================
OpenSees Navigator: Version 2.5.5
File sourced: C:/mat/新建文件夹/yy/yyyy/y12/second example/second example.tcl
Starting OpenSees analysis: 14-Mar-2016 13:27:08
===============================================================================

########################
# Analysis-Sequence 1 #
########################
o Analysis: pushover
WARNING: CTestNormDispIncr::setEquiSolnAlgo() – no SOE
WARNING DisplacementControl::domainChanged() – zero reference loadStaticAnalysis::setAlgorithm() – Integrator::domainChanged() failedStaticAnalysis::analyze() – domainChanged failed at step 0 of 1
OpenSees > analyze failed, returned: -1 error flag
o Time taken: 0.035 sec

===============================================================================
Finished OpenSees analysis: 14-Mar-2016 13:27:08
===============================================================================

hopefully that you can give me some advice. as it is hardly to find anyguys who know how to use Opensees around me.

thanks a lot
best regard

  • This reply was modified 7 years, 2 months ago by yuyang.